Solid waste disposal equipment

The specific steps of the solid waste incineration process include:
Pre-treatment: Waste is mixed, sent to the waste feed hopper by the grab, filtered and sprayed into the rotary kiln and the second combustion chamber for incineration respectively.
Combustion process: solid waste undergoes high temperature decomposition and combustion reaction in the rotary kiln.
Energy recovery: The high temperature flue gas generated in the second combustion chamber enters the waste heat boiler to recover part of the energy to produce steam.
Flue gas purification: The flue gas after being cooled sharply enters the dry reaction device to adsorb the harmful substances, and then enters the bag filter to remove dust. Finally, it reaches the strict flue gas emission standard.
Emission: The purified flue gas is heated to eliminate the white smoke and then sent to the chimney to be discharged into the atmosphere through the action of induced draft fan.

Send mail

Hotline

+8618073104088

Product details
Product parameters

Product parameters:

微信图片_20240924154337.jpg

Capacity:100kg/h～3000kg/h

Incinerator features

　　1) This equipment can simultaneously incinerate solid waste, liquid, colloid, gas, the adaptability of the incineration material is strong.

　　2) incineration material tumbling forward, three kinds of heat transfer coexist in a furnace, heat utilization rate is high.

　　3) high-temperature material contact refractory materials, easy to replace the furnace lining, low cost.

　　4) drive mechanism is simple, drive mechanism in the kiln shell, equipment maintenance is simple.

　　5) The shape of the incineration material, moisture content requirements are not high.

　　6) rotary kiln residence time of up to 1 hour and 700 ℃ high temperature, so that hazardous wastes are basically burned out; two combustion chamber of strong gas mixing makes the flue gas in the incomplete combustion of combustion material completely burned to achieve the decomposition of hazardous components of the high temperature required (1100 ℃). High-temperature area of the flue gas residence time of 2 seconds, not only to make the garbage burned through, but also from the source to avoid or reduce the generation of dioxins in the working conditions of the area;.

　　7) good sealing measures and negative pressure in the furnace chamber to ensure that harmful gases are not leaked.

　　8)High operation rate of the equipment, the annual operation rate is generally up to 90%: easy to operate and maintain.

　　9) back to the jurisdiction of the kiln to add enhanced heat transfer and prevent slagging devices, while improving the incineration efficiency to expand the adaptability of the incinerator to the waste.

　　10)Evolution of the traditional two combustion chamber into a two-combustion furnace, improve the rate of combustion of ash, improve the burning efficiency of the rotary kiln, and at the same time has a room temperature slag, slag crushing, air locking and other comprehensive functions.

　　Scope of application

　　1, a variety of dangerous industrial waste, medical waste, domestic waste, etc.

　　2, a variety of sludge, slurry, plastics, rubber grease residue, asphalt and other polymer wastes

　　3、High concentration of waste liquid, waste water, waste solvents, etc.